The key points of safety dynamic compaction construction are analyzed as follows. In view of this knowledge, we should understand that a solid foundation is the foundation of all projects, and its importance is extraordinary. In all foundation treatment process, dynamic compaction is a crucial step in this important link. Today, the foundation dynamic compaction machine construction company will share some key points for attention of dynamic compaction construction, which are as follows:

强夯机租赁

Lease of dynamic rammer

注意一、确保各项施工要素

Pay attention to the first, to ensure the construction elements

强夯施工相较于其它的施工要求会更为严格，一般来说强夯作业的场地施工前必须平整，且其具体的作业区域还必须设有警戒标志或围栏，严禁非作业人员进入。虽然很多的工地在进行施工前都会进行以上工作，但是很多工厂在设立警戒标志或围栏的时间却在强夯施工后，这对于整个工程而言是具有一定危险性的。除此以外，应该在不影响司机视线的情况下在吊锤机械驾驶室前设防护网，且进行工作时佩戴防护镜，防止弹石。

Compared with other construction requirements, dynamic compaction construction will be more stringent. Generally speaking, the site of dynamic compaction must be leveled before construction, and the specific operation area must also be equipped with warning signs or fences, and non operators are strictly prohibited from entering. Although many construction sites will carry out the above work before construction, many factories set up warning signs or fences after dynamic compaction construction, which is dangerous for the whole project. In addition, a protective net should be set in front of the cab of the hammer lifting machine without affecting the driver's sight, and wear protective glasses when working to prevent stones.

注意二、检查必不可少

Attention 2. Safety inspection is essential

在进行强夯施工前应对起重设备、索具、卡环、插销及工器具等进行检查，并进行试吊、试夯，夯机应安装夯锤上升高度限位器。起吊夯锤、吊索应保持垂直、匀速，夯锤及挂钩不得碰撞吊臂，吊臂应有防夯锤碰撞保护措施。夯机在工作状态时，臂杆仰角应控制在一个合适的固定范围值之间。

Before the construction of dynamic compaction, the lifting equipment, rigging, snap ring, bolt and tools shall be comprehensively inspected, and trial hoisting and tamping shall be carried out. The ram shall be installed with RAM lifting height limiter. When lifting the ram and sling, keep vertical and uniform speed. The ram and hook shall not collide with the boom. The boom shall be protected against rammer collision. When the rammer is working, the boom elevation should be controlled between a suitable fixed range.

以上两点是我们在强夯机施工过程中需要特别注意的问题，希望能得到大家的重视，更多有关于这方面的知识我们将继续为您整理带来，敬请期待

The above two points are the safety issues that we need to pay special attention to in the process of dynamic compaction machine construction. We hope that we can get your attention. We will continue to bring more knowledge about this aspect for you. Please look forward to it