In real life, when people are carrying out road construction or building construction, they often need to use mechanical equipment such as hook machine. So, as a driver, how should he operate the dynamic compaction machine? What should we pay attention to during the operation? For this series of problems, you may as well patiently look at the following introduction:
1、 First of all, let's understand the useful excavation methods of dynamic compaction machine: when the bucket cylinder and connecting rod, and the bucket rod cylinder and the bucket rod form 90 degrees with each other, the excavation force is maximum; When the bucket teeth keep a 30 degree angle with the ground, the digging force is the best, that is, the cutting resistance is the least. When digging with the stick, the angle range of the stick should be between 45 degrees from the front to 30 degrees from the back. Using the boom and bucket at the same time can improve the digging efficiency.
2、 Secondly, we need to understand some important matters needing attention in the operation of the dynamic compaction machine: when operating the dynamic compaction machine, first of all, we need to confirm the surrounding conditions. When rotating, we need to know the surrounding obstacles and terrain well and operate safely; During operation, confirm the front and rear direction of the track to avoid tipping or impact; During the operation, try not to face the final drive to the excavation direction, otherwise it is easy to damage the walking motor or hose; During operation, the left and right crawlers should be fully contacted with the ground to improve the dynamic stability of the whole machine.
To sum up, we can see that the dynamic compaction machine is not easy to operate. Therefore, it needs to be operated by the driver. After all, it is a technical activity.